CEJN's Product Introduction | Malaysia,Thailand,Indonesia,Philippines

Pneumatics
CEJN’s Pneumatic product line includes the world’s best-performing quick connect couplings, blowguns, polyurethane hoses, lightweight and heavy-duty hoses, cable reels and accessories. CEJN offers all the necessary components, from FRL units to compressed air couplings, to ensure reliable compressed air performance worldwide.

Standard Couplings & Nipples
CEJN’s Pneumatic Couplings and Nipples are specially designed to address the two most common causes of energy loss in compressed air systems, leaks and pressure drops. Our couplings are easy to handle and have a long service life. All products are made of plated quality steel and brass.

Series 141, DN 2.5
DN 2.5 mm (3/32"). Flow capacity of 86 l/min (3.0 CFM). Max working pressure 10 bar (150 PSI). Made of chrome-plated brass. Suitable for compressed air, fluid and vacuum applications.

Series 220, DN 5
DN 5 mm (3/16"). Flow capacity of 580 l/min (20.5 CFM). Max working pressure 35 bar (510 PSI). Made of nickel-plated steel. Suitable for compressed air, fluid and vacuum applications.

Series 300, DN 5.5
DN 5.5 mm (7/32"). Flow capacity of 1,050 l/min (37.1 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. High flow coupling with low connection force.

Series 303, DN 6.5
DN 6.5 mm (1/4"). Flow capacity of 1,450 l/min (51.2 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. High flow coupling suitable for compressed air and vacuum applications.

Series 310, DN 5.3
DN 5.3 mm (7/32"). Flow capacity of 925 l/min (32.7 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. ISO 6150 B standard, A-A 59439 standard (former U.S Standard MIL C 4109 1/4"). High flow coupling with low connection force.

Series 315, DN 7.5
DN 7.5 mm (5/16"). Flow capacity of 1,950 l/min (68.8 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. Asian standard profile with a wide range of connections.

Series 320, DN 7.6
DN 7.6 mm (5/16"). Flow capacity of 2,100 l/min (74.1 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. CEJN original standard, Eurostandard 7.6 (7.4).

Series 408, DN 9.5
DN 9.5 mm (3/8"). Flow capacity of 3,450 l/min (121.8 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. High flow coupling suitable for compressed air and vacuum applications.

Series 410, DN 10.4
DN 10.4 mm (13/32"). Flow capacity of 3,900 l/min (137.7 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. CEJN original standard, Eurostandard 10.4. Couplings with extremely high flow and low connection force. Available in a wide range of connections.

Series 430, DN 8.2
DN 8.2 mm (5/16"). Flow capacity of 2,350 l/min (83.0 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. Standards ISO 6150 B and A-A-59439 (former U.S. Standard MIL C 4109 3/8"). High flow capacity with small outside dimensions.

Series 550, DN 11
DN 11 mm (7/16"). Flow capacity of 3,750 l/min (132.4 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. Standards ISO 6150 B and A-A-59439 (former U.S. Standard MIL C 4109 1/2"). Strong and durable with a low connection force.

Safety Couplings & Nipples
CEJN’s range of safety couplings for pneumatic applications are designed to prevent hose whipping accidents. By venting the air prior to disconnection the sound level is also reduces to a minimum. The safety range also features the same high flow capacity and low pressure drop design as the standard range.

Series 300 Safety, DN 5.5
DN 5.5 mm (7/32"). Flow capacity of 975 l/min (34.4 CFM). Max working pressure 12 bar (170 PSI). Made of zinc-plated steel/brass. Complies with safety standards ISO 4414 and EN 983.

Series 310 Safety, DN 5.3
DN 5.3 mm (7/32"). Flow capacity of 900 l/min (31.8 CFM). Max working pressure 12 bar (170 PSI). Made of zinc-plated steel/brass. ISO 6150 B standard, A-A 59439 standard (former U.S Standard MIL C 4109 1/4"). Complies with safety standards ISO 4414 and EN 983.

Series 320 Safety, DN 7.6
DN 7.6 mm (5/16"). Flow capacity of 1,900 l/min (67.1 CFM). Max working pressure 12 bar (170 PSI). Made of zinc-plated steel/brass. CEJN original standard, Eurostandard 7.6 (7.4). Complies with safety standards ISO 4414 and EN 983.

Series 410 Safety, DN 10.4
DN 10.4 mm (13/32"). Flow capacity of 3,700 l/min (130.6 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel/brass. CEJN original standard, Eurostandard 10.4. Complies with safety standards ISO 4414 and EN 983.

Series 550 Safety, DN 11
DN 11 mm (7/16"). Flow capacity of 3000 l/min (105.9 CFM). Max working pressure 16 bar (232 PSI). Made of zinc-plated steel/brass. Standards ISO 6150 B and A-A-59439 (former U.S. Standard MIL C 4109 1/2"). Complies with safety standards ISO 4414 and EN 983.

Safety Lock Couplings & Nipples
Safety lock couplings are specially designed to prevent unintentional disconnection during operation. An added locking function requires the operator to “unlock” the coupling before it can be disengaged. The safety lock couplings are one-hand operated during connection but require two hands for disconnection.

Series 342, DN 7.4
DN 7.4 mm (9/32"). Flow capcity of 1,950 l/min (68.8 CFM). Max working pressure 35 bar (510 PSI). Made of zinc-plated steel. The automatic safety-locking feature prevents unintentional disconnection.

Series 442, DN 10.4
DN 10.4 mm (13/32"). Flow capacity of 3950 l/min (139.4 CFM). Max working pressure 35 bar (508 PSI). Made of zinc-plated steel/brass. The automatic safety-locking feature prevents unintentional disconnection.

Button Style Couplings & Nipples
The button style couplings are a range of ISO 6150 C couplings that disengage in two steps to vent residual air. The couplings comply with ISO 4414 and are interchangeable with several other brands on the market.

Series 291, DN 5.5
DN 5.5 mm (7/32"). Flow capacity of 640 l/min (22.6 CFM). Max working pressure 12 bar (170 PSI). Made of steel. Button style coupling. ISO 6150 C.

Series 381, DN 8
DN 8 mm (5/16"). Flow capacity of 1,050 l/min (37.1 CFM). Max working pressure 10 bar (150 PSI). Made of steel. Button style coupling. ISO 6150 C.

Series 471, DN 11
DN 11 mm (7/16"). Flow capacity of 2,350 l/min (83.0 CFM). Max working pressure 8 bar (116 PSI). Made of steel. Buttob style coupling. ISO 6150 C.

Soft-Line Couplings
CEJN Soft-Line “softens” the edges of quick connect couplings, making them non-abrasive and less likely to cause damage to surrounding components and surfaces. They also protect couplings from impact, prolonging the service life of the couplings.

Series 300, DN 5.5
DN 5.5 mm (7/32"). Flow capacity of 975 l/min (34.4 CFM). Max working pressure 12 bar (170 PSI). Made of zinc-plated steel. High flow coupling with low connection force that is ideal for work on or near delicate surfaces.

Series 310, DN 5.3
DN 5.3 mm (7/32"). Flow capacity of 925 l/min (32.7 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel. ISO 6150 B standard, A-A 59439 standard (former U.S Standard MIL C 4109 1/4"). High flow coupling with low connection force ideal for work on or near delicated surfaces.

Series 320, DN 7.6
DN 7.6 mm (5/16"). Flow capacity of 2,100 l/min (74.1 CFM). Max working pressure 16 bar (230 PSI). Made of zinc-plated steel. CEJN original standard, Eurostandard 7.6 (7.4). Coupling with extremely high flow and low connection force. Ideal for work on or near delicate surfaces.

Accessory Soft-Line Covers
The accessory covers are designed to be added onto couplings to "softens" the edges of quick connect couplings, making them non-abrasive and less likely to cause damage to surrounding components and surfaces.

Lightweight Couplings
CEJN aluminum couplings weigh 50% less than standard CEJN couplings, and up to 70% less than traditional couplings on the market, making it a perfect fit for lightweight tools. The aluminum design although light in weight is far from light in performance. It offers the same quality performance as any other CEJN product and since aluminum is a non-ferrous material it also offers low magnetic interference.

Series 320, DN 7.6
DN 7.6 mm (5/16"). Flow capacity of 2100 l/min (74.1 CFM). Max working pressure 16 bar (230 PSI). Made of aluminum. CEJN original standard, Eurostandard 7.6 (7.4). Lightweight couplings with extremely high flow and low connection force.

Multi-Link Couplings
The Multi-Link integrated quick connect couplings come in units of 2 and 3 outlets. The units can also easily be connected to create more access points. Ideal for uncluttering existing work areas or to create new flexible work stations. The integrated couplings provide flexibility and high performance, the design allows for a large number of outlets without restricting the flow with T-connections, bends or elbows. Combine with our high quality polyurethane hose to create a flexible high performance air distribution system.

Series 300 Safety Multi-Link
Outlet units with 2 and 3 integrated Series 300 safety couplings. To create multiple access points in one location without cluttering the work area or restricting the airflow with t-connections, bends and elbows.

Series 310 Multi-Link
Outlet units with 2 and 3 integrated Series 310 couplings. To create multiple access points in one location without cluttering the work area or restricting the airflow with t-connections, bends and elbows.

Series 310 Safety Multi-Link
Outlet units with 2 and 3 integrated Series 310 safety couplings. To create multiple access points in one location without cluttering the work area or restricting the airflow with t-connections, bends and elbows.

Series 315 Multi-Link
Outlet units with 2 and 3 integrated Series 315 couplings. To create multiple access points in one location without cluttering the work area or restricting the airflow with t-connections, bends and elbows.

Series 320 Standard
Outlet units with 2 and 3 integrated Series 320 couplings. To create multiple access points in one location without cluttering the work area or restricting the airflow with t-connections, bends and elbows.

Series 320 Safety Multi-Link
Outlet units with 2 and 3 integrated Series 320 couplings. To create multiple access points in one location without cluttering the work area or restricting the airflow with t-connections, bends and elbows.

Hose
CEJN offers an extensive hose range with several different styles of polyurethane (PUR) hoses. The material of PUR offers a high rate of flow and exceptional resistance to oils, solvents and other non-aqueous solutions. The hoses have excellent recoil ability and are extremely flexible and remain flexible after extensive use.

Straight Braided Hose
Light and flexible hose with working pressure up to 16 bar (depending on hose dimension). Wide temperature range and high tensile, tear and impact strenght.

Straight Non-Braided Hose
Light and flexible hose with working pressure of 10 bar. High tensile, tear and impact strength. Made of FDA approved ester-based polyurethane.

Straight Braided Conductive Hose
Electrically conductive hose with an integral wire that dissipates electro-static discharge. An excellent choice for applications where static discharge has the potential to cause explosions or damage. Working pressure up to 16 bar (230 PSI) (depending on hose dimension).

Straight Braided Anti-Spark Hose
The hose is resistant to scorching and damage while exposed to sparks in welding or steel cutting environments. Working pressure up to 14 bar (200 PSI) (depending on hose dimension).

Straight Braided Water Hose
Excellent choice for compressed air in damp and wet environments. The hose has high impact strength and is functional in a wide temperature range. It easily springs back to its original form and has excellent abrasion resistance. Working pressure of 10 bar (150 PSI).

Spiral Hose
Spiral hose with excellent recoil ability and crimp resistance. The hose is abrasion resistant and is suitable for applications in a wide temperature range. Working pressure 10 bar (145 PSI).

Spiral Anti-Spark Hose
Spiral hose resistant to scorching and damage while exposed to sparks in welding or steel cutting environments. Working pressure of 10 bar (150 PSI). The hose is designed for compressed air and breathing air applications.

Hose Kits
CEJN offers a pre-assembled hose and coupling combination that is ready for immediate use without the need for tools. Each hose kit contains a CEJN polyurethane hose style, Stream-Line couplings, nipples and swivels that provides reusable, leak-free hose connections.

Hose Kits with Series 300
Pre-assembled Hose Kits with spiral or straight hose and Series 300 Standard or Vented Safety couplings and nipples.

Hose kits with Series 310
Pre-assembled Hose Kits with spiral or straight hose and Series 310 Standard or Vented Safety couplings and nipples.

Hose Kits with Series 320
Pre-assembled Hose Kits with spiral or straight hose and Series 320 Standard or Vented Safety couplings and nipples.

Hose Kits with Series 410
Pre-assembled Hose Kits with spiral or straight hose and Series 410 Vented Safety couplings and nipples.

Hose kits with Adapters and Accessories
Pre-assembled kits with hose, adapters and accessories.

Hose & Cable Reels
CEJN’s high quality hose and cable reels contain a CEJN polyurethane hose or rubber cable. The reels are easy to manoeuvre and can be ceiling- or wall-mounted and offer full, 300-degree, movement. A robust exterior housing protects the hose or cable and reel mechanism and the feeding action works flawless and tangle free. A stop function can be activated if full continuous feeding is not necessary at the time.

Hose Reels for Compressed Air
Hose reels for compressed air. Available in several casing sizes and hose dimensions. Features high-quality, oil-resistant polyurethane hose and enclosed casing for longer service life.

Hose Reels for Water
Hose reels for water. Also ideal for compressed air applications in damp and wet environment. Available in several casing sizes and hose dimensions. Features high-quality, oil-resistant polyurethane hose and enclosed casing for longer service life.

Cable Reels
Cable reels available in two casing sizes. Features a thermal overload protection circuit. The cable is high made of high quality rubber. Availalbe with schuko or CH plugs. CEJN cable reels are CE marked.

Blowguns
CEJN Blowguns are designed to be lightweight, comfortable to handle and suitable for both left- and right-handed users. The handle is pleasant to grip and shields against cold airflow. The different styles of CEJN Blowguns offered are standard full-flow, noise reducing Star-Tip and a pressure-regulated safety version.

Blowguns
Blowgun with ergonomical controls. Suitable for both air and non-explosive liquides. Available in several styles, including standard full-flow, noise-reducing Star-Tip, and a pressure-regulated safety version.

Blowgun Accessories
Removable accessories for Series 208 blowgun. Various tubes and tips are available to meet specific application requirements.

FRL Products
CEJN’s Filtration, Regulation and Lubrication (FRL) products are designed to provide constant high-quality air within compressed air systems. CEJN’s FRL products are easy to assemble as well as maintain and can be top- or side-mounted. The products are available as stand-alone components or in complete system packages.

Filter/Regulators Model 107
Model 107 Filter/Regulators feature a bowl capacity of 7 cl, max air flow of 1300 l/min, controlled pressure of 0.5 to 10 bar and a filtration capacity between 5 to 25 µm.

Filter/Regulators Model 112
Model 112 Filter/Regulators feature a bowl capacity of 12 cl, max air flow of 3000 l/min, controlled pressure of 0.5 to 10 bar and a filtration capacity between 5 to 25 µm.

Filter/Regulators Model 160
Model 160 Filter/Regulators feature a bowl capacity of 50 cl, max air flow of 13 000 l/min, controlled pressure of 0.5 to 12 bar and a filtration capacity between 5 to 30 µm.

Filters Model 107
Model 107 Filters are the smallest of three sizes and has a 7 cl bowl capacity, a max flow of 1450 l/min and a filtration capacity between 0.01 to 25 µm.

Filters Model 112
Model 112 is the mid sized version of CEJN's three available filter sizes and has a 12 cl bowl capacity, a max flow of 2400 l/min and a filtration capacity between 0.01 to 25 µm.

Filters Model 160
Model 160 filters is the largest of three sizes and has a 50 cl bowl capacity, a max flow of 13 500 l/min and a filtration capacity between 5 to 30 µm.

Lubricators Model 107
Model 107 Lubricators feature a oil capacity of 4 cl and a max air flow of 3 500 l/min (minimum flow for lubrication startup is 20 l/min). The model is available with G 1/4" thread.

Lubricators Model 112
Model 112 Lubricators feature a oil capacity of 7 cl and a max air flow of 53 500 l/min (minimum flow for lubrication startup is 20 l/min). The model is available with G 3/8" and G 1/2" threads.

Lubricators Model 160
Model 160 Lubricators feature an oil capacity of 36 cl and a max air flow of 15 500 l/min (minimum flow for lubrication startup is 90 l/min). The model is available with G 3/4" and G1" threads.

Regulators Model Mini
The Mini Regulator model features a compact design with a max air flow of 650 l/min, max inlet pressure of 12 bar and a controlled pressure of 0.5 to 10 bar. The model is available with G 1/8" and G 1/4" threads.

Regulators Model 107
Model 107 features a max air flow of 1300 l/min, max inlet pressure of 16 bar and a controlled pressure of 0.5 to 10 bar. The model is available with G 1/4" thread.

Regulators Model 112
Model 112 features a max air flow of 3000 l/min, max inlet pressure of 16 bar and a controlled pressure of 0.5 to 10 bar. The model is available with G 3/8" and G 1/2" threads.

Regulators Model 160
Model 160 regulators features a max air flow of 13.000 l/min, max inlet pressure of 16 bar and a controlled pressure of 0.5 to 12 bar. The model is available with G 3/4" and G 1" threads.

FRL Systems Model 107
Model 107 FRL systems features three different sets; filter/regulators + lubricators, filter/regulator + porting block + lubricator, filter + regulator + lubricator. The sets are available with G 1/4" thread.

FRL Systems Model 112
Model 112 FRL systems features six different sets; filter/regulators + lubricators, filter/regulator + porting block + lubricator, filter + regulator + lubricator, filter/regulator 5 μm + filter 0.01 μm, filter/regulator 5 μm + filter 0.01 μm with metal bowl, portable system with filter + regulator + lubricator. The sets are available with G 3/8" and G 1/2" threads.

FRL Systems Model 160
Model 160 FRL systems features three different sets; filter/regulators + lubricators, filter/regulator + porting block + lubricator, filter + regulator + lubricator. The sets are available with G 3/4" and G 1" threads.

FRL Accessories and Spare Parts
Large range of accessories and spare parts for the CEJN air-treatment range.

Accessories
Accessories available for CEJN Pneumatic products are adapters to create different hose connections, Compact Pressure Tester to spot-check pressure and Soft-Line Accessory Covers to protect the coupling and its surroundings from impact.

Stream-Line Hose Adapters
CEJN Stream-Line connections are available with swivel and fixed adapters, both are offered with or without kink protectors.

Brass Adapters
A wide range of hose connectors; male-to-male adapters; bushings; plugs; cross, T-, L-, and Y-pieces; and ball valves for maximum flexibility in a variety of applications.

Stainless Steel Adapters
A large range of hose connectors and male-to-male adapters in stainless steel.

Compact Pressure Tester
The CEJN Compact Pressure Tester provides a fast method to measure system outlet pressure and ensure air systems are working to specifications.

Breathing Air
CEJN Breathing Air couplings have a high-flow rate, a broad connection range and require only minimal force to connect. With the vital function of supplying breathing air, the need for safety and reliability is of the utmost importance. CEJN's products are designed and manufactured to exacting standards, which has resulted in years of trouble-free service. Presented here are CEJN’s couplings and nipples, hoses, hose kits and accessories for breathing air applications.

Couplings & Nipples
In the field of breathing air application there are no compromises to be made regarding quality and safety. CEJN has extra stringent tests to ensure that the high quality demanded is achieved. CEJN couplings and nipples for breathing air are thoroughly examined and tested individually, this to guarantee that each coupling and nipple that leaves our production is of the highest quality.

Series 141
DN 2.5 mm. Air fllow capacity of 86 l/min (3.0 CFM) and water flow capacity of 3.5 l/min (0.8 GPM UK). Max working pressure 10 bar (150 PSI). The series is made of chrome-plated brass and suitable for compressed air, fluid and vacuum applications.

Series 221
DN 5.0 mm (3/16"). Air flow capacity of 580 l/min (20.5 GPM uk). Max working pressure 35 bar (508 PSI). Made of chrome-plated brass with NBR seal.

Series 341
DN 7.4 mm (9/32"). Flow capacity of 1950 l/min (68.8 CFM). Max working pressure 35 bar (508 PSI). Made of nickel-plated brass with NBR seals. Ideal for cushion inflation and diving applications.

Series 342
DN 7.4 mm (9/32"). Flow capacity of 1950 l/min (68.8 CFM). Max working pressure 35 bar (508 PSI). Made of zinc-plated steel/brass. The automatic safety-locking feature prevents unintentional disconnection

Series 344
DN 7.4 mm (9/32"). Flow capacity of 1950 l/min (68.8 CFM). Max working pressure 35 bar (508 PSI). Made of nickel-plated brass with NBR seals. Primarily for breathing air firefighting applications, but is also well suited for diving equipment.

Series 345
DN 6.2 mm (1/4"). Flow capacity of 1100 l/min (38.8 CFM). Max working pressure 35 bar (508 PSI). Made of nickel-plated brass with NBR seals. Well-suited for breathing air diving applications and for applications that demand a closed system when disconnected, such as surface air diving (hookah).

Series 346
DN 7.0 mm (9/32"). Flow capacity of 800 l/min (28.2 CFM). Max working pressure 35 bar (508 PSI). Made of stainless steel (AISI 316) with NBR seals. Ideal choice for applications in tough environments.

Series 347
DN 6.2 mm (1/4"). Flow capacity of 1100 l/min (38.8 CFM). Max working pressure 35 bar (508 PSI). Made of nickel-plated brass with NBR seals. The nipple is non-interchangeable with other CEJN series couplings making it useful in applications with multiple access points for different media.

Series 348
DN 4.1 mm (5/32"). Flow capacity of 650 l/min (22.9 CFM). Max working pressure 10 bar (145 PSI). Made of nickel-plated brass/stainless steel with EPDM seals. Well-suited for fire-fighting applications.

Series 441
DN 10.4 mm (13/32"). Flow capacity of 3950 l/min (139.4 CFM). Max working pressure 35 bar (508 PSI). Made of nickel-plated brass with NBR seals. Well-suited for air cushion inflation and breathing air diving applications in which extra high airflow is required.

Series 442
DN 10.4 mm (13/32"). Flow capacity of 3950 l/min (140.0 CFM). Max working pressure 35 bar (508 PSI). Made of zinc-plated brass with NBR seals. Well-suited for large supply lines for portable equipment with multiple air outlets.

Hose
CEJN ester based polyurethane (PUR) hoses for breathing air are available as green spiral non-braided hose and as black straight braided hose. CEJN PUR hoses for breathing air offer outstanding aging qualities and long service life. Their resistance to sparks and scorching make them suitable for applications near welding equipment.

Spiral Anti-Spark Hose
Spiral hose resistant to scorching and damage while exposed to sparks in welding or steel cutting environments. Working pressure of 10 bar (150 PSI). The hose is designed for compressed air and breathing air applications.

Hose Kits
CEJN offers a pre-assembled hose and coupling combination that is ready for immediate use without the need for tools. Each hose kit contains a CEJN polyurethane hose style, Stream-Line couplings, nipples and swivels that provide reusable, leak-free hose connections.

Anti-Spark Hose Kits with Series 342
Pre-assembled kits with anti-spark spiral hose and series 342 coupling and nipples.

Accessories
CEJN offers a wide range of hose connectors; male-to-male adapters; bushings; plugs; T-, L-, and Y-pieces; and crosses for breathing air compressed air and liquid applications. A wide range of both cylindrical and conical threads is available for maximum flexibility in a variety of applications. All adapters are plated for better protection against corrosion and feature a high burst pressure/working pressure factor of safety.

Brass Adapters
A wide range of hose connectors; male-to-male adapters; bushings; plugs; cross, T-, L-, and Y-pieces; and ball valves for maximum flexibility in a variety of applications.

Fluids
To quickly connect and disconnect are abilities products for fluids must have, as well as being leak free, able to withstand the media transferred and to endure the operating conditions they are subjected to. All of which CEJN Fluid products have. Couplings and nipples for fluids are available in valved and valveless designs for low- and medium pressure application. Presented here are couplings and nipples, hoses and hose kits for fluid applications.

Non-Drip Brass Couplings & Nipples
CEJN’s Non-Drip couplings are designed solely for low-pressure fluid and vacuum applications. The product range has unlimited combination possibilities and is ideal for connecting all types of fluid lines.

DN4 (Series 267)
DN 4.0 mm (5/32"). Flow capacity for double shut-off version of 17 l/min (3.7 GPM UK). Max working pressure 20 bar (290 PSI). Made of nickel-plated brass with nitrile seals.
Part No.: 102676400, 102676200, 102675400, 102675200

DN6 (Series 467)DN 6.0 mm (1/4"). Flow capacity for double shut-off version of 36 l/min (7.9 GPM UK). Max working pressure 20 bar (290 PSI). Made of nickel-plated brass with nitrile seals.

DN9 (Series 567)
DN 9.0 mm (11/32"). Flow capacity for double shut-off version of 76 l/min (16.7 GPM UK). Max working pressure 20 bar (290 PSI). Made of nickel-plated brass with nitrile seals.

DN14 (Series 667)
DN 14.0 mm (9/16"). Flow capacity for double shut-off version of 168 l/min (37.0 GPM UK). Max working pressure 20 bar (290 PSI). Made of nickel-plated brass with nitrile seals.

DN19 (Series 767)
DN 19.0 mm (3/4"). Flow capacity for double shut-off version of 306 l/min (67.3 GPM UK). Max working pressure 20 bar (290 PSI). Made of nickel-plated brass with nitrile seals.

Non-Drip Accessories
Included as accessories in the Non-Drip range are dust caps for both couplings and nipples in all sizes.

Non-Drip Stainless Steel Couplings & Nipples
CEJN’s Non-Drip couplings are designed solely for low-pressure fluid and vacuum applications. The product range has unlimited combination possibilities and is ideal for connecting all types of fluid lines.

DN4 (Series 277)
DN 4.0 mm (5/32"). Flow capacity for double shut-off version of 17 l/min (3.7 GPM UK). Max working pressure 20 bar (290 PSI). Made of stainless steel (AISI 316) with FPM (Viton®) seals.

DN6 (Series 477)
DN 6.0 mm (1/4"). Flow capacity for double shut-off version of 36 l/min (7.9 GPM uk). Max working pressure 20 bar (290 PSI). Made of stainless steel (AISI 316) with FPM (Viton®) seals.

DN9 (Series 577)
DN 9.0 mm (11/32"). Flow capacity for double shut-off version of 76 l/min (16.7 GPM UK). Max working pressure 20 bar (290 PSI). Made of stainless steel (AISI 316) with FPM (Viton®) seals.

DN14 (Series 677)
DN 14.0 mm (9/16"). Flow capacity for double shut-off version of 168 l/min (37.0 GPM UK). Max working pressure 20 bar (290 PSI). Made of stainless steel (AISI 316) with FPM (Viton®) seals.

DN19 (Series 777)
DN 19.0 mm (3/4"). Flow capacity for double shut-off version of 306 l/min (67.3 GPM UK). Max working pressure 20 bar (290 PSI). Made of stainless steel (AISI 316) with FPM (Viton®) seals.

Non-Drip Accessories
Included as accessories in the Non-Drip range are dust caps for both couplings and nipples in all sizes.

Classic Couplings & nipples
CEJN’s fluid couplings are available in both valved and valveless designs for low- and medium-pressure applications, with maximum working pressures up to 200 bar (2900 PSI).

Series 225
DN 3.0 mm (1/8"). Flow capacity of 8 l/min (1.8 GPM uk). Max working pressure 35 bar (508 PSI). Made of chrome-plated brass with NBR seal

Series 141
DN 2.5 mm (3/32"). Flow capacity of 3.5 l/min (0.8 GPM UK). Max working pressure 10 bar (150 PSI). Made of chrome-plated brass with NBR seal. Available in single-shut off style (valved coupling - valvless nipple).

Series 324
DN 6.2 mm (1/4"). Flow capacity of 42 l/min (9.2 GPM UK). Max working pressure 35 bar (508 PSI). Made of nickel-plated brass with NBR, FPM or EPDM seal.

Series 326
DN 6.2 mm (1/4"). Flow capacity for the single-shut off version of 28 l/min (6.2 GPM UK). Max working pressure 70 bar (1015 PSI). Made of stainless steel (AISI 316) with NBR or FPM seal. Available in single and double shut-off versions.

Series 411
DN 10.4 mm (13/32"). Flow capacity of 156 l/min (34.32 GPM UK). Max working pressure 35 bar (508 PSI). Made of nickel-plated brass with NBR seal.

Series 412
DN 10.4 mm (13/32"). Flow capacity of 167 l/min (36.7 GPM UK). Max working pressure 200 bar (2900 PSI). Made of nickel-plated brass with NBR seal. Available in single shut-off and straight through versions.

Series 414
DN 8.9 mm (11/32"). Flow capacity of 71 l/min (15.6 GPM UK). Max working pressure 35 bar (508 PSI). Made of chrome-plated brass with NBR seal.

Series 416
DN 8.9 mm (11/32"). Flow capacity for the single shut-off version of 85 l/min (18.7 GPM UK). Max working pressure 35 bar (508 PSI). Made of stainless steel (AISI 316) with NBR or FPM seal.

Series 417
DN 10.5 mm (13/32"). Flow capacity in straight through version of 226 l/min (49.7 GPM UK). Max working pressure 20 bar (290 PSI). Made of chrome-plated brass with NBR seal. Available in single shut-off and straight through versions.

Series 604
DN 14.5 mm (9/16"). Flow capacity for the single shut-off version of 205 l/min (45.1 GPM UK). Max working pressure 35 bar (508 PSI). Made of chrome-plated brass with NBR of FPM seals. Available in double or single shut-off versions.

Series 606
DN 14.5 mm (9/16"). Flow capacity for the single shut-off version of 205 l/min (45.1 GPM UK). Max working pressure 35 bar (508 PSI). Made of stainless steel with FPM seal. Available in double or single shut-off versions.

Series 704
DN 19.0 mm (3/4"). Flow capacity in single shut-off version of 390 l/min (85.8 GPM UK). Max working pressure 35 bar (508 PSI). Made of chrome-plated brass with NBR or FPM seals. Available in double or single shut-off versions.

Series 706
DN 19.0 mm (3/4"). Flow capacity in single shut-off version of 390 l/min (85.8 GPM UK). Max working pressure 35 bar (508 PSI). Made of stainless steel with FPM seal. Available in double or single shut-off versions.

Hose
CEJN straight braided polyutherane (PUR) hose is suitable for both water and compressed air applications and is designed for working pressures up to 10 bar. It has a two-layer of blue ether based PUR and a reinforced middle layer of polyester fibre, this gives it an extended temperature range of –30 °C up to +60 °C.

Straight Braided Water Hose
Excellent choice for compressed air in damp and wet environments. The hose has high impact strength and is functional in a wide temperature range. It easily springs back to its original form and has excellent abrasion resistance. Working pressure of 10 bar (145 PSI).

Accessories
CEJN offers a wide range of hose connectors; male-to-male adapters; bushings; plugs; T-, L-, and Y-pieces; and crosses for compressed air and liquid applications. A wide range of both cylindrical and conical threads is available for maximum flexibility in a variety of applications.

Brass Adapters
A wide range of hose connectors; male-to-male adapters; bushings; plugs; cross, T-, L-, and Y-pieces; and ball valves for maximum flexibility in a variety of applications.

Stainless Steel Adapters
A large range of hose connectors and male-to-male adapters in stainless steel.

Hydraulics
CEJN Hydraulic couplings are suitable for applications with operating pressures up to 320 bar (4640 PSI) for both industrial and mobile hydraulics. By using CEJN Hydraulic couplings, pollution through hydraulic fluid leakage is reduced and helps to protect the environment from harm. Presented here are couplings, nipples, and pressure testing systems for hydraulic applications.

X65 Flat-Face Steel Couplings & Nipples
CEJN Series X65 quick connect couplings and nipples are compliant with the ISO 16028 Standard. The couplings and nipples are made of plated steel and available in seven sizes ranging from DN 5 to DN 25. A Push-Pull version for panel mounting is available in some sizes. An extra security locking offers added protection against involuntary disconnection. A perfect fit for tough hydraulic applications.

Series 165, DN5 Steel
DN 5.0 (3/16"). Rated flow 3.6 l/min (0.8 GPM UK). Max working pressure connected 72 MPa. Made of plated steel with Nitrile seals.

Series 265, DN6.3 Steel
DN 6.3 (1/4"). Rated flow 12 l/min (2.6 GPM UK). Max working pressure connected 50 MPa. Made of plated steel with Nitrile seals. Part of the X65 range of ISO 16028 compatible Flat-Face couplings in steel.

Series 365, DN10 Steel
DN 10 (3/8"). Rated flow 23 l/min (5.1 GPM UK). Max working pressure connected 40 MPa. Made of plated steel with Nitrile seals. Part of the X65 range of ISO 16028 compatible Flat-Face couplings in steel.

Series 565, DN12.5 Steel
DN 12.5 (1/2"). Rated flow 45 l/min (9.9 GPM UK). Max working pressure connected 40 MPa. Made of plated steel with Nitrile seals. Part of the X65 range of ISO 16028 compatible Flat-Face couplings in steel.

Series 665, DN16 Steel
DN 16 (5/8"). Rated flow 74 l/min (16.3 GPM UK). Max working pressure connected 40 MPa. Made of plated steel with Nitrile seals. Part of the X65 range of ISO 16028 compatible Flat-Face couplings in steel.

Series 765, DN19 Steel
DN 19 (3/4"). Rated flow 100 l/min (22.0 GPM UK). Max working pressure connected 40 MPa. Made of plated steel with Nitrile seals. Part of the X65 range of ISO 16028 compatible Flat-Face couplings in steel.

Series 065, DN25 Steel
DN 25 (1"). Rated flow 189 l/min (41.6 GPM UK). Max working pressure 30 MPa. Made of plated steel with Nitrile seals. Part of the X65 range of ISO 16028 compatible Flat-Face couplings in steel.

X-Series Accessories
Accessories for the X-Series products. Dust caps for couplings and nipples and seal kits for nipples. Fits the X62 Series, the X64 Series, the X65 Series and the X66 Series.

X66 Flat-Face Stainless Steel Couplings & Nipples
CEJN Series X66 quick connect couplings and nipples are dimensionally in accordance with the ISO 16028 Standard. The couplings and nipples are made of stainless steel and available in four sizes ranging from DN 6.3 to DN 19. An extra security locking offers added protection against involuntary disconnection. A perfect fit for hydraulic/fluid applications with corrosive media or in corrosive environments such as the offshore, chemical, paper/pulp and food industries.

Series 266, DN6.3 Stainless Steel
DN 6.3 (1/4"). Rated flow 12 l/min (2.6 GPM UK). Max working pressure connected 25 MPa. Made of stainless steel with viton seals. Part of the X66 range of Flat-face couplings in stainless steel dimensionally designed according to ISO 16028.

Series 366, DN10 Stainless Steel
DN 10 (3/8"). Rated flow 23 l/min (5.1 GPM UK). Max working pressure connected 25 MPa. Made of stainless steel with viton seals. Part of the X66 range of Flat-face couplings in stainless steel dimensionally designed according to ISO 16028.

Series 566, DN12.5 Stainless Steel
DN 12.5 (1/2"). Rated flow 45 l/min (9.9 GPM UK). Max working pressure connected 25 MPa. Made of stainless steel with viton seals. Part of the X66 range of Flat-face couplings in stainless steel dimensionally designed according to ISO 16028.

Series 766, DN19 Stainless Steel
DN 19 (3/4"). Rated flow 100 l/min (22.0 GPM UK). Max working pressure connected 25 MPa. Made of stainless steel with viton seals. Part of the X66 range of Flat-face couplings in stainless steel dimensionally designed according to ISO 16028.

X-Series Accessories
Accessories for the X-Series products. Dust caps for couplings and nipples and seal kits for nipples. Fits the X62 Series, the X64 Series, the X65 Series and the X66 Series

X62 Flat-Face Couplings & Nipples
CEJN Series X62 quick connect couplings and nipples are dimensionally in accordance with the ISO 16028 Standard. The couplings and nipples are made of plated steel and available in three sizes ranging from DN 6.3 to DN 12.5. The series is especially developed to suit the less stringent demands of hydraulic applications with a maximum working pressure of 25 MPa.

Series 262, DN 6.3 Light version
DN 6.3 (1/4"). Rated flow 11 l/min (2.4 GPM UK). Max working pressure connected 25 MPa. Made of plated steel with nitrile seals. Part of the X62 range of ISO 16028 interchangeable Flat-Face couplings in plated steel.

Series 362, DN10 Light version
DN 10 (3/8"). Rated flow 21 l/min (4.6 GPM UK). Max working pressure connected 25 MPa. Made of plated steel with nitrile seals. Part of the X62 range of ISO 16028 interchangeable Flat-Face couplings in plated steel.

Series 562, DN12.5 Light version
DN 12.5 (1/2"). Rated flow 41 l/min (9.0 GPM UK). Max working pressure connected 25 MPa. Made of plated steel with nitrile seals. Part of the X62 range of ISO 16028 interchangeable Flat-Face couplings in plated steel.

Series 962, DN25 Light version
DN 25 (1"). Rated flow 189 l/min (41.6 GPM UK). Max working pressure connected 25 MPa. Made of plated steel with nitrile seals. Part of the X62 range of ISO 16028 interchangeable Flat-Face couplings in plated steel.

X-Series Accessories
Accessories for the X-Series products. Dust caps for couplings and nipples and seal kits for nipples. Fits the X62 Series, the X64 Series, the X65 Series and the X66 Series

X64 Pressure Eliminator Nipples
CEJN Series X64 offer quick-connect nipples with a built-in pressure eliminator. The pressure eliminator solves problems with high connection force due to residual pressure on the nipple side. The Series are interchangeable with the ISO Standard 16028 and therefore a suitable complement to Series X62 and X65. The Series is made of plated steel and offered in five sizes ranging from DN 6.3 to DN 19. A suitable product for applications where residual pressure on the nipple side is a problem.

Series 264, DN6.3 Pressure Eliminator
DN 6.3 (1/4"). Rated flow 9.0 l/min (2.0 GPM UK). Max working pressure connected 50 MPa. Made of plated steel with Nitrile seals. Part of the X64 range of ISO 16028 compatible Flat-Face nipples with pressure eliminators.

Series 364, DN10 Pressure Eliminator
DN 10 (3/8"). Rated flow 19 l/min (4.2 GPM UK). Max working pressure connected 40 MPa. Made of plated steel with Nitrile seals. Part of the X64 range of ISO 16028 compatible Flat-Face nipples with pressure eliminators.

Series 564, DN12.5 Pressure Elminator
DN 12.5 (1/2"). Rated flow 43 l/min (9.5 GPM UK). Max working pressure connected 40 MPa. Made of plated steel with Nitrile seals. Part of the X64 range of ISO 16028 compatible Flat-Face nipples with pressure eliminators.

Series 664, DN16 Pressure Eliminator
DN 16 (5/8"). Rated flow 70 l/min (15.4 GPM UK). Max working pressure connected 40 MPa. Made of plated steel with Nitrile seals. Part of the X64 range of ISO 16028 compatible Flat-Face nipples with pressure eliminators.

Series 764, DN19 Pressure Eliminator
DN 19 (3/4"). Rated flow 105 l/min (23.1 GPM UK). Max working pressure connected 40 MPa. Made of plated steel with Nitrile seals. Part of the X64 range of ISO 16028 compatible Flat-Face nipples with pressure eliminators.

X-Series Accessories
Accessories for the X-Series products. Dust caps for couplings and nipples and seal kits for nipples. Fits the X62 Series, the X64 Series, the X65 Series and the X66 Series.

Nordic Range Steel Couplings & Nipples
CEJN Series 525 are somewhat of a "Nordic standard" in steel. Its heavy-duty design ensures maximum durability and high performance. The products are equipped with additional security locking and extra sealing for improved performance. The optional pressure eliminator facilitates a low connection force even when either half is under residual pressure. The couplings and nipples are made of plated steel and those parts exposed to extreme strain and stress are hardened for extra durability. The Series is offered in five sizes ranging from DN 6.3 to DN 25.

Series 525, DN6.3
DN 6.3 mm (1/4"). Rated flow 29 l/min (6.4 GPM UK). Max working pressure connected 45 MPa. Made of plated steel with Nitrile seals.

Series 525, DN10
DN 10 mm (3/8"). Rated flow 69 l/min (15.2 GPM UK). Max working pressure connected 35 MPa. Made of plated steel with Nitrile seals.

Series 525, DN12.5
DN 12.5 mm (1/2"). Rated flow 122 l/min (26.8 GPM UK). Max working pressure connected 30 MPa. Made of plated steel with Nitrile seals.

Series 525, DN20
DN 20 mm (3/4"). Rated flow 250 l/min (55.0 GPM UK). Max working pressure connected 28 MPa. Made of plated steel with Nitrile seals.

Series 525, DN25
DN 25 mm (1"). Rated flow 425 l/min (93.5 GPM UK). Max working pressure connected 25 MPa. Made of plated steel with Nitrile seals.

Nordic Range Accessories
Accessories for the Nordic range. Dust caps for couplings and nipples and seal kits containing two O-rings and a backup ring for replacing the outer seals in the coupling.

Nordic Range Stainless Steel Couplings & Nipples
CEJN Series 526 are somewhat of a "Nordic standard" in stainless steel. Its heavy-duty design ensures maximum durability and high performance. The products are equipped with additional security locking and extra sealing for improved performance. The couplings and nipples are made of stainless steel. The Series is offered in five sizes ranging from DN 6.3 to DN 25.

Series 526, DN6.3
DN 6.3 mm (1/4"). Rated flow 29 l/min (6.4 GPM UK). Max working pressure connected 25 MPa. Made of stainless steel with viton seals.

Series 526, DN10
DN 10 mm (3/8"). Rated flow 69 l/min (15.2 GPM UK). Max working pressure connected 30 MPa. Made of stainless steel with viton seals.

Series 526, DN12.5
DN 12.5 mm (1/2"). Rated flow 122 l/min (26.8 GPM UK). Max working pressure connected 30 MPa. Made of stainless steel with viton seals.

Series 526, DN20
DN 20 mm (3/4"). Rated flow 250 l/min (55.0 GPM UK). Max working pressure connected 20 MPa. Made of stainless steel with viton seals.

Series 526, DN25
DN 25 mm (1"). Rated flow 425 l/min (93.5 GPM UK). Max working pressure connected 20 MPa. Made of stainless steel with viton seals.

Nordic Range Accessories
Accessories for the Nordic range. Dust caps for couplings and nipples and seal kits containing two O-rings and a backup ring for replacing the outer seals in the coupling.

Flat-Face Screw Couplings & Nipples
CEJN's Flat-Faced screw-to-connect couplings are specially adapted to suit demanding industrial applications. The Series have a working pressure of up to 55 MPa and can be connected with residual pressure in the system. The Series are made of plated steel with high-stressed components made of hardened steel for extra protection. The couplings and nipples are available in three sizes ranging from DN 12.5 to DN 25. Their Flat-Face design in combination with the screw-to-connect design make them ideal for demanding hydraulic applications such as hammer applications, where standard ball-locking type couplings do not meet the requirements.

Series 585, DN 12.5
DN 12.5 (1/2"). Max suggested flow 45 l/min (9.9 GPM UK). Max working pressure connected 55 MPa. Made of plated steel with Nitrile seals.

Series 685, DN 19
DN 19 (3/4"). Max suggested flow 100 l/min (22.0 GPM UK). Max working pressure connected 50 MPa. Made of plated steel with Nitrile seals.

Series 785, DN 25
DN 25 (1"). Max suggested flow 189 l/min (41.6 GPM UK). Max working pressure connected 47 MPa. Made of plated steel with Nitrile seals.

ISO A Couplings & Nipples
CEJN's range of ISO A couplings and nipples are compliant with the ISO Standard 7241-1 A. Their sturdy steel design ensures a long, maintenance free service life even in the toughest environments. As added protection, those parts exposed to extreme strain and stress, such as locking sleeves and nipples, are made of hardened steel. Offered is also an additional Push-Pull version for panel mounting in DN 12.5. The Series are made of plated steel and are available in five sizes ranging from DN 6.3 to DN 25. Their sturdy design and good performance make them suitable for agriculture and general industrial applications.

Series 395, DN 6.3
DN 6.3 (1/4"). Max suggested flow 12 l/min (2.6 GPM UK). Max working pressure connected 35 MPa. Made of plated steel with Nitrile seals.

Series 495, DN 10
DN 10 (3/8"). Max suggested flow 23 l/min (6.1 GPM UK). Max working pressure connected 30 MPa. Made of plated steel with Nitrile seals.

Series 595, DN 12.5
DN 12.5 (1/2"). Max suggested flow 45 l/min (9.9 GPM UK). Max working pressure connected 25 MPa. Made of plated steel with Nitrile seals.

Series 695, DN 20
DN 20 (3/4"). Max suggested flow 74 l/min (16.3 GPM UK). Max working pressure connected 25 MPa. Made of plated steel with Nitrile seals.

Series 795, DN 25
DN 25 (1"). Max suggested flow 100 l/min (22.0 GPM UK). Max working pressure connected 23 MPa. Made of plated steel with Nitrile seals.

ISO A Accessories
Dust caps for ISO A couplings and nipples.

ISO B Steel Couplings & Nipples
CEJN's range of ISO B steel couplings and nipples are compliant with the ISO Standard 7241-1 B. Their robust design offers a long, trouble free service life even in the roughest environments. The Series are made of plated steel and all high stress parts, such as the locking sleeve and nipple, are made of hardened steel for extra protection. They are available in five sizes ranging from DN 6.3 to DN 25. The Series' sturdy design in combination with good performance make them suitable for applications such as the iron, steel, oil, food and automotive industry.

Series 375, DN 6.3
DN 6.3 (1/4"). Max suggested flow 12 l/min (2.6 GPM UK). Max working pressure connected 35 MPa. Made of plated steel with Nitrile seals.

Series 475, DN 10
DN 10 (3/8"). Max suggested flow 23 l/min (5.1 GPM UK). Max working pressure connected 30 MPa. Made of plated steel with Nitrile seals.

Series 575, DN 12.5
DN 12.5 (1/2"). Max suggested flow 45 l/min (9.9 GPM UK). Max working pressure connected 28 MPa. Made of plated steel with Nitrile seals.

Series 675, DN 20
DN 20 (3/4"). Max suggested flow 74 l/min (16.3 GPM UK). Max working pressure connected 23 MPa. Made of plated steel with Nitrile seals.

Series 775, DN 25
DN 25 (1"). Max suggested flow 100 l/min (22.0 GPM UK). Max working pressure connected 18 MPa. Made of plated steel with Nitrile seals.

ISO B Accessories
Dust caps for ISO B range couplings and nipples.

ISO B Stainless Steel Couplings & Nipples
CEJN's range of ISO B stainless steel couplings and nipples are compliant with the ISO Standard 7241-1 B. Their sturdy design facilitates a long maintenance free service life even in the most demanding environments. The Series are made of stainless steel and available in five sizes ranging from DN 6.3 to DN 25. Their sturdy design and good performance make them suitable for applications such as the offshore, chemical, paper/pulp and food industries.

Series 376, DN 6.3
DN 6.3 (1/4"). Max suggested flow 12 l/min (2.6 GPM UK). Max working pressure connected 25 MPa. Made of stainless steel with viton seals.

Series 476, DN 10
DN 10 (3/8"). Max suggested flow 23 l/min (6.1 GPM UK). Max working pressure connected 20 MPa. Made of stainless steel with viton seals.

Series 576, DN 12.5
DN 12.5 (1/2"). Max suggested flow 45 l/min (9.9 GPM UK). Max working pressure connected 20 MPa. Made of stainless steel with viton seals.

Series 676, DN 20
DN 20 (3/4"). Max suggested flow 74 l/min (16.3 GPM UK). Max working pressure connected 16 MPa. Made of stainless steel with viton seals.

Series 776, DN 25
DN 25 (1"). Max suggested flow 100 l/min (22.0 GPM UK). Max working pressure connected 12.5 MPa. Made of stainless steel with viton seals.

ISO B Accessories
Dust caps for ISO B range couplings and nipples.

Classic Couplings & Nipples
CEJN’s Classic Range of hydraulic quick connect couplings and nipples feature products with small external dimension as well as extremely low connection force. They are one-hand operated and come equipped with dust caps as standard. The Series are made of high-grade steel and are available in four sizes ranging from DN 6.2 to DN 19.

Series 325
DN 6.2 (1/4"). Flow capacity of 33 l/min (7.3 GPM UK). Max working pressure 25 MPa. Made of nickel-plated steel with Nitrile seals.

Series 415
DN 8.9 (11/32"). Flow capacity of 61 l/min (13.4 GPM UK). Max working pressure 25 MPa. Made of plated steel with Nitrile seals.

Series 605
DN 14.5 mm (9/16"). Flow capacity of 167 l/min (36.7 GPM UK). Max working pressure 25 MPa. Made of plated steel with Nitrile seals.

Series 705
DN 19.0 mm (3/4"). Flow capacity of 290 l/min (63.8 GPM UK). Max working pressure 32 MPa. Made of plated steel with NBR seals.

Snap-Check Monitoring System
The Snap-Check pressure testing system easily monitors and diagnoses fluid systems. It identifies operating pressure surges without the need for a permanently installed gauge. The maximum working pressure of 60 MPa (600 bar) ensures extra long, leak free service and unsurpassed reliability. The system features quick to connect couplings and nipples. Also available are hoses, gauges and a sturdy carrying case.

Couplings and Nipples
CEJN's Snap-Check pressure testing system monitors and diagnoses fluid systems in a snap. This monitoring system identifies operating pressure surges without the need for a permanently installed gauge. Presented here are the available Snap-Check Couplings and Nipples.

Hose
CEJN's Snap-Check pressure testing system monitors and diagnoses fluid systems in a snap. This monitoring system identifies operating pressure surges without the need for a permanently installed gauge. Presented here are the available Snap-Check hose.

Pressure Gauges
CEJN's Snap-Check pressure testing system monitors and diagnoses fluid systems in a snap. This monitoring system identifies operating pressure surges without the need for a permanently installed gauge. Presented here are the available Snap-Check Pressure Gauges.

Accessories
CEJN's Snap-Check pressure testing system monitors and diagnoses fluid systems in a snap. This monitoring system identifies operating pressure surges without the need for a permanently installed gauge. Presented here are the different available Snap-Check accessories.

Press-Check Monitoring System
The Press-Check pressure testing system easily monitors and diagnoses fluid systems. It identifies operating pressure surges without the need for a permanently installed gauge. The Press-Check system features screw-to-connect couplings and nipples in a wide range of connections. Available are also hoses, fittings, gauges and dust caps.

Nipples
Test-point nipples for the Press-Check system. The nipples are available with plastic or metal dust caps and comes in four different sealing types; metal to metal seal, sealing by fitted ring, sealing by thread and sealing by O-ring.

Nipples with 24° Sealing Cone
Test point nipples for the Press-Check system with 24° sealing cone. The nipples are available in light and heavy designs according to DIN 3865. They come equipped with plastic or metal dust caps.

Nipples with T-Connection
Test point nipples for the Press-Check system with T-connections. The nipples are available in light and heavy designs according to DIN 2353. They come equipped with plastic or metal dust caps.

Nipples with Female Swivel
Test point nipples for the Press-Check system with female swivel JIC 37° - SAE J514. The nipples come equipped with plastic or mertal dust caps.

Nipples with Female Swivel
Test point nipples for the Press-Check system with female swivel. The nipples come equipped with plastic or metal dust caps.

Nipples with Bulkhead Connections
Test point nipples for the Press-Check system with metric thread bulkhead connections. The nipples come equipped with plastic or metal dust caps.

Nipples with Bulkhead Connections DIN 386
Test point nipples for the Press-Check system with bulkhead connections according to DIN 386. The nipples come equipped with plastic or metal dust caps.

Nipples with Bulkhead Connections SAE J514
Test point nipples for the Press-Check system with bulkhead connections according to SAE J514. The nipples come equipped with plastic or metal dust caps.

Stand Pipe Nipples
Test point nipples for the Press-Check system with stand pipe connections. The nipples come equipped with plastic or metal dust caps.

Gauge connections
Gauge connections for the Press-Check system. They are available in a coupling version and two thread versions; one swivel connection and one bulkhead connection. The pressure gauge coupling is available in two version one free flow and one with pressure damper.

Coupling with 90° Elbow Connection
Coupling with 90° elbow connection for the Press-Check system.

Pressure Gauges
The pressure gauges of the Press-Check system are encased in stainless steel AISI 304. The Snap-Check standard range features a combined bar/PSI scale within an accuracy of ±1.6 percent of full scale.

Accessories
Accessories for the Press-Check monitoring system. Gauges covers and dust caps.

Hose DN2
Extremely flexible, polyamide, high-pressure hose assemblies for the Press-Check system. Included in the hose range is also a wide range of fittings.

Hose DN4
Extremely flexible, polyamide, high-pressure hose assemblies for the Press-Check system. Included in the hose range is also a wide range of fittings.

High-pressure Hydraulics
CEJN has over 40 years of experience in quick connect coupling technology for high-pressure hydraulics and offers a wide range of products with operating pressures up to 3000 bar (43,500 PSI), CEJN High-Pressure Hydraulic couplings are specially designed for ultra high pressure pumps, rescue equipment and other demanding applications. Presented here are couplings and nipples, hoses, pressure gauges and porting blocks for high-pressure hydraulic applications.

Couplings & Nipples
All CEJN High-Pressure Hydraulic couplings and nipples are designed with a non-drip interface to minimize fluid spillage and air inclusion during connection and disconnection. Dust caps are a standard feature to protect the hydraulic systems from dirt and debris.

Series 115, 100 MPa
DN 2.5 mm (3/32"). Flow capacity of 6.0 l/min (1.32 GPM uk). Max working pressure 100 MPa. Made of hardened zinc chromate plated steel.

Series 116, 150 MPa
DN 2.5 mm (3/32"). Flow capacity of 6.0 l/min (1.3 GPM UK). Max working pressure 150 MPa. Made of hardened zinc chromate plated steel.

Series 117, 100 MPa
DN 2.5 mm (3/32"). Flow capacity of 6.0 l/min (1.3 GPM uk). Max working pressure 100 MPa. Made of hardened zinc chromate plated steel.

Series 125, 200 MPa
DN 2.5 mm (3/32"). Flow capacity of 5.8 l/min (1.3 GPM uk). Max working pressure 200 MPa. Made of hardened zinc chromate plated steel.

Series 135, 300 MPa
DN 2.5 mm (3/32"). Flow capacity of 4.6 l/min (1.0 GPM uk). Max working pressure 300 MPa. Made of hardened black finished steel.

Series 218, 100 MPa
DN 4.5 mm (11/64"). Flow capacity of 15 l/min (3.3 GPM UK). Max working pressure 100 MPa. Made of hardened zinc chromate plated steel.

Flat-Face Couplings & Nipples
The one-hand-to-connect Flat-Face couplings have been developed to reliably meet the rigorous demands of ultra-high pressure hydraulic applications. Engineered to exacting tolerances, using the most durable materials, CEJN ultra-high pressure couplings hold up where other couplings fail.

Series 115 Flat-Face
DN 2.5 mm (3/32"). Flow capacity of 5.3 l/min (1.2 GPM UK). Max working pressure 80 MPa. Made of hardened zinc chromate plated steel/aluminum.

Series 116 Flat-Face
DN 2.5 mm (3/32"). Flow capacity of 5.3 l/min (1.16 GPM UK). Max working pressure 150 MPa. Made of hardened zinc chromate plated steel.

Screw-to-connect couplings & nipples
CEJN's screw to connect couplings for high-pressure hydraulics consist of couplings in two sizes that are interchangeable with most screw-to-connect couplings and nipples on the market. The couplings can be connected under pressure and are well suited for hand pumps, cylinders and jacks, just to mention a few applications.

Series 230, DN5
DN 5.0 mm (1/4"). Flow capacity of 16.1 l/min (3.5 GPM UK). Max working pressure 70 MPa. Made of zinc plated steel. Screw-to-connect couplings.

Series 230, DN7
DN 7.0 mm (3/8"). Flow capacity of 21.2 l/min (4.7 GPM UK). Max working pressure 70 MPa. Made of zinc plated steel. Screw-to-connect couplings.

Hose
CEJN High-Pressure hoses for hydraulics are spiralized steel reinforced polymer that has ultra-high working pressure with maintained flexibility. The small outside diameter makes the hose ideal for tight routing. All types can be supplied ready assembled and factory tested in the required length.

Hose 70 MPa, DN 6
A spiralized steel reinforced polymer hose with ultra-high working pressure. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. Working pressure of 70 MPa.

Hose 70 MPa, DN 10
A spiralized steel reinforced polymer hose with ultra-high working pressure. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. Working pressure of 70 MPa.

Hose 72 MPa, DN 6
A spiralized steel reinforced polymer hose with ultra-high working pressure. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. Working pressure of 72 MPa.

Hose 100 MPa, DN 6
A spiralized steel reinforced polymer hose with ultra-hi working pressure. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. Working pressure of 100 MPa.

Hose 180 MPa, DN 5
A spiralized steel reinforced polymer hose with ultra-hi working pressure. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. Working pressure of 180 MPa.

Hose 250 MPa, DN 5
A spiralized steel reinforced polymer hose with ultra-hi working pressure. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. Working pressure of 250 MPa.

Hose 300 MPa, DN 4
A spiralized steel reinforced polymer hose with ultra-hi working pressure. Its low volumetric expansion gives fast response time in hydraulic systems while the smooth inner bores provide a minimized pressure drop. Working pressure of 300 MPa.

Accessories
CEJN's range of high-pressure accessories includes an extensive assortment of adapters, porting blocks and pressure gauges. The adapters are suitable for most couplings and hoses to ensure safe and troubled free connections with a working pressure of up to 300 MPa. Five different porting blocks are available to make it possible to connect several hydraulic lines from a single pump to as well as connecting pressure gauges to the line. CEJN pressure gauge range comprises of both bottom and panel mounted gauges in models up to 200 MPa.

Adapters
CEJN provides and extensive range of high-pressure hydraulic adapters suitable for most couplings and hoses. All adapters are manufactured of black-zinc plated steel. Working pressure varies between 100 MPa and 300 MPa, see product table for data on respective adapters.

Seals
CEJN's high-pressure range includes several rubber metal seals designed to complement the high-pressure hydraulic couplings and nipples. Max wowrking pressure range from 100 to 150 MPa.

Porting Blocks
CEJN’s porting blocks make it possible to utilise/connect several hydraulic lines from a single pump to numerous tools as well as the possibility of connecting a pressure gauge. The blocks are available in five different sizes and designs with a varying number of ports.

Pressure Gauges
Bottom and panel mounted pressure gauges in models up to 2000 bar (200 MPa). All models are glycerine filled for improved performance and long life. The gauges are made of stainless steel and feature high accuracy and a long service life.

Multi & Auto
CEJN’s Multi- & Auto products are high-tech couplings and nipples designed to be built into manifolds and plates. This enables several fluid lines to be engaged and connected and disconnected in an instant. Presented here are three styles designed for modular systems: Automation couplings suitable for fluid or hydraulic applications and the Multi-Snap system for fluid applications.

Auto-Couplings Hydraulics
CEJN's Automation Couplings have a design that enables connection and disconnection under full working pressure. Adapted for industrial automations it has a working pressure up to 300 bar (4350 PSI). The CEJN Automation Couplings are available in steel suitable for hydraulic applications.

DN3 (Series 915)
DN 3 mm (1/8"). Max working pressure 300 bar (4350 PSI). Made of black finished steel. Suitable for hydraulic applications.

DN6 (Series 925)
DN 6 mm (1/4"). Max working pressure 300 bar (4351 PSI). Made of black finished steel. Suitable for hydraulic applications.

DN8 (Series 945)
DN 8 mm (5/16"). Max working pressure 300 bar (4351 PSI). Made of black finished steel. Suitable for hydraulic applications.

DN11 (Series 965)
DN 11 mm (7/16"). Max working pressure 300 bar (4351 PSI). Made of black finished steel. Suitable for hydraulic applications.

DN15 (Series 975)
DN 15 mm (7/16"). Max working pressure 300 bar (4351 PSI). Made of black finished steel. Suitable for hydraulic applications.

DN19 (Series 985)
DN 19 mm (3/4"). Max working pressure 300 bar (4351 PSI). Made of black finished steel. Suitable for hydraulic applications.

Auto-couplings pneumatics
The CEJN Pneumatic Auto-Couplings are able to connect with or without a nipple, intended for use in automatic manifold connection systems for compressed air. They have a unique valve design that enables the coupling to seal against a mating block. CEJN's Auto-Couplings for air are easy to install and features qualities such as generous misalignment capability and reduced distance to connect.

DN2.5 (Series 961)
DN 2.5 mm (3/32"). Max working pressure 10 bar (145 PSI). Made of nickel-plated brass. Suitable for compressed air and other media.

DN5 (Series 971)
DN 5 mm (3/16"). Max working pressure 10 bar (145 PSI). Made of nickel-plated brass. Suitable for compressed air and other media.

DN10 (Series 981)
DN 10 mm (3/8"). Max working pressure 10 bar (145 PSI). Made of nickel-plated brass. Suitable for compressed air and other media.

Multi-Snap
CEJN Multi-Snap system is a manual push-to-connect manifold system for fluid applications. It features up to 8 couplings/nipples in the same manifold for simultaneous connection and disconnection. Both couplings and nipples are self-sealing when disconnected to prevent leakage. They are made of chrome-plated brass and stainless steel for long reliable service.


DN6.2
DN 6.2 mm (1/4"). Flow capacity of 19 l/min. (0.7 CFM). Max working pressure 15 bar (217 PSI). Made of chrome-plated brass and stainless steel. Suitable for fluid applications.

DN8.9
DN 8.9 mm (11/32"). Flow capacity of 32 l/min. (1.1 CFM). Max working pressure 15 bar (217 PSI). Made of chrome-plated brass and stainless steel. Suitable for fluid applications.

WEO Plug-In
As more and more applications industry-wide are being converted from threaded to threadless connectors, WEO Plug-In hose fittings are the connection of choice for critical equipment applications. CEJN WEO Plug-In threadless hose fittings simply “plug in” to hydraulic systems. WEO fittings are available in sizes 1/4" through 1" with maximum working pressures of up 350 bar (5075 PSI). Presented here are couplings, nipples, cartridges and ferrules for mobile hydraulic applications.

Couplings & Nipples
WEO Plug-Ins have click-to-connect and self-aligning features that make them easy to install in hydraulic systems. In addition, work injuries associated with connection/disconnection and follow-up tightening/untightening are eliminated. With the simple connection and disconnection of the WEO fittings, only a common screwdriver is needed for service or assembly replacements.
Nipples - Straight Hose Connection
Plug-In nipples with straight hose connections for one/two wire braided hydraulic hose in sizes 1/4" to 1"

Nipples - 45° Hose Connection
Plug-In nipples with 45° hose connections for one/two wire braided hydraulic hose in sizes 1/4" to 3/4"

Nipples - 90° Hose Connection
Plug-In nipples with 90° hose connections for one/two wire braided hydraulic hose in sizes 1/4" to 3/4"

Nipples - Straight Hose Connection
Plug-In nipples with straight hose connections for one/two wire braided hydraulic hose in sizes 3/8" to 1". This nipples are specifically made to correspond to the WEO Plug-In swivel Series 860.

Nipples - Male plug
Plug-In stop nipples in size 1/4" to 1"

Couplings - External G-Thread (ISO 228/1)
Plug-In couplings with external G-thread (ISO 228/1)

Couplings - Female plug
Plug-In stop coupling in sizes 1/4" up to 1"

Couplings - Bulkhead
Plug-In bulkhead couplings in sizes 1/4" up to 1/2"

Couplings - Straight Hose Connection
Plug-In couplings with straight hose connections for one/two wire braided hydraulic hose in sizes 1/4" up to 1"

Couplings - SAE J514 O-Ring Boss
Plug-In couplings SAE J514 O-ring Boss in sizes 1/4" up to 1"

Couplings - External G-Thread with Integral Rubber Seal
Plug-In couplings with external G-thread with integral rubber seal in sizes 1/4" up to 1"

Couplings - Metric (ISO 6149-3)
Plug-In couplings with external metric thread (ISO 6149 - 3) in sizes 1/4" up to 3/4"

Swivels
The WEO Plug-In swivel is a plug-in connector with integrated swivel function that absorbs the movement in the hydraulic hose. The WEO Plug-In swivel can be turned 360° and prevents torque stress on the hydraulic hose and is specially adapted for modern compact hydraulic systems. The product is as small and flexible as the base version of WEO Plug-In but swivels freely up to full working pressure.

Swivel Couplings
Plug-In swivel couplings with external G-thread with internal rubber seal in sizes 3/8" up to 1"

Tools & Equipment
Under the product range "Tools and Equipment" CEJN makes automotive service tools that focus on making fluid handling easier, brake servicing quicker and brake bleeding safer for the operator. These automotive products go hand in hand with CEJN pneumatic products for compressed air applications.

DX
DX is CEJN's combined range of brake service and fluid handling products. Developed for a wide range of applications the DX products feature a flexible handling system and a wide range of accessories making it a perfect fit for virtually all types of fluid service work regardless of industry field.

DX
CEJN DX extracts fluids from vehicle brakes quickly and safely via vacuum bleeding. Universal seals enable extraction of all kinds of non-flammable fluids, even aggressive-type brake fluids. It comes in two canister sizes; 2.5 and 12 liters.

DX Accessories
In the DX range is a large selection of accessories included such as Accessory Kits, a dipstick tube and a variety of tubes.

Body Tools
CEJN's product line of Body Tools is comprised of a high quality spot blaster for precision cleaning. Its integrated recycling system turns it into an environmentally and user friendly must have to

RustEater
CEJN RustEater is powered by standard shop air and has an integrated recycling system that allows the spot blaster to reuse grit over and over. This keeps workshops clean and minimizes the consumption of blast grit. In addition, blasting cabinets and protective clothing are unnecessary.ol.

CEJN Distribution Network : Afghanistan, Albania, Algeria, Andorra, Angola Antigua & Barbuda, Argentina, Armenia Australia, Austria, Azerbaijan ,Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium Belize, Benin, Bhutan, Bolivia, Bosnia & Herzegovina, Botswana, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burma (Myanmar), Burundi ,Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad Chile, China, Colombia, Comoros, Congo, Congo, Democratic Republic of the Costa Rica, Côte d'Ivoire, Croatia, Cuba, Cyprus, Czech Republic ,Denmark, Djibouti ,Dominica, Dominican Republic ,Ecuador, East Timor, Egypt El Salvador, England, Equatorial Guinea Eritrea, Estonia, Ethiopia ,Fiji ,Finland, France ,Gabon Gambia, The Georgia, Germany, Ghana, Great Britain, Greece, Grenada Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,Honduras,Hungary ,Iceland India, Indonesia, Iran, Iraq, Ireland ,Israel, Italy ,Jamaica, Japan, Jordan ,Kazakhstan, Kenya, Kiribati, Korea North, Korea South, Kosovo, Kuwait, Kyrgyzstan ,Laos, Latvia, Lebanon,Lesotho, Liberia, Libya ,Liechtenstein, Lithuania, Luxembourg ,Macedonia , Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar ,Namibia, Nauru, Nepal, The Netherlands, New Zealand, Nicaragua, Niger ,Nigeria, Norway, Northern Ireland ,Oman,Pakistan, Palau, Palestinian State*, Panama, Papua, New Guinea, Paraguay, Peru, The Philippines, Poland, Portugal ,Qatar,Romania, Russia ,Rwanda ,St. Kitts & Nevis, St. Lucia, St. Vincent & The Grenadines, Samoa, San Marino, São Tomé & Príncipe, Saudi Arabia, Scotland, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, Spain, Sri Lanka, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria ,Taiwan, Tajikistan, Tanzania, Thailand ,Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu ,Uganda, Ukraine, United Arab Emirates(UAE), United Kingdom, United States (USA) ,Uruguay, Uzbekistan ,Vanuatu, Vatican City (Holy See), Venezuela ,Vietnam ,Western Sahara* , Wales ,Yemen,Zaire ,Zambia & Zimbabwe